How to Clean a Hot Tub: Step-by-Step

A person in a blue shirt is installing or removing a cylindrical water filter cartridge outdoors, near a white brick wall.

To clean a hot tub, test and balance the water regularly, rinse the filters every 2–4 weeks, deep clean them every 3–4 months, and drain, scrub and refill the spa every 3–4 months. Wipe the shell, waterline and cover between water changes. Always follow your spa’s owner’s manual and the labels on your water-care products.

This step-by-step guide shows Eau Claire-area owners how to clean a hot tub the simple way, from weekly checks to a full drain and refill.

Your Hot Tub Cleaning Schedule at a Glance

Task How Often
Test and balance water On your water-care system’s schedule
Rinse filters Every 2–4 weeks
Deep clean filters Every 3–4 months
Drain, clean and refill Every 3–4 months
Wipe the waterline and cover As needed between water changes

Your owner’s manual and water-care system may recommend different timing, so use those as your final guide. Find yours on our Hot Spring owner’s manuals page.

Step 1: Test and Balance the Water

Clean water starts with balanced water. Test sanitizer and pH on the schedule your water-care system recommends and adjust as the product labels direct. Balanced water is more comfortable and easier on the spa’s components.

If testing feels like a chore, simpler systems can help. Browse Poolman’s Hot Spring water care options.

Step 2: Rinse the Filters

Filters catch the dirt and oils that would otherwise cloud your water. Every 2–4 weeks:

  • Turn off the power before removing the filters.
  • Remove the filters as your manual describes.
  • Rinse with a garden hose, working between the pleats to wash out loose debris.
  • Reinstall and restore power.

A spray cleaner like the Hot Spring FreshWater Instant Filter Cleaner Spray helps lift oils between deep cleans.

Step 3: Deep Clean the Filters

Every 3–4 months, give the filters a deeper soak in a filter cleaner such as Hot Spring FreshWater Filter Cleaner, following the label directions, then rinse well before reinstalling. Many owners time this with the drain and refill. If a filter still looks dirty or damaged after cleaning, it’s time to replace it. For more detail, see our hot tub filter cleaning tips.

Step 4: Drain the Spa

Every 3–4 months, drain and refill to keep the water fresh.

  1. Turn off the power at the breaker.
  2. Drain the water using the spa’s drain or a pump.
  3. Remove the filters so you can clean them while the tub is empty.

In a Wisconsin winter, draining takes extra care, because an empty or idle spa is more vulnerable to freezing. Plan a winter water change for a milder day and ask our team about the safest way to refill. Our hot tub drain and refill guide covers the full process.

Step 5: Scrub the Shell

With the spa empty, wipe down the shell with a soft cloth and a non-abrasive cleaner made for spas. Pay attention to the waterline, where oils and residue build up, and to the area around the jets. Avoid household cleaners, which can leave residue that causes foam. Rinse the shell thoroughly before refilling.

Step 6: Clean the Cover

The cover keeps heat in and debris out, so it deserves attention too. Wipe the top and underside with a mild, cover-safe cleaner and let it dry. Look for cracks, sagging or a cover that has become noticeably heavier, which can mean it’s waterlogged. If yours is worn, see our Hot Spring spa covers.

Step 7: Refill and Rebalance

Reinstall the clean filters, refill the spa, and restore power. Then test and balance the water following your water-care system’s start-up directions before the first soak.

Signs Your Hot Tub Needs More Than a Cleaning

If water stays cloudy, foams or smells off after cleaning and balancing, or you notice leaks, error codes or weak jets, it may be a service issue. Read the warning signs your hot tub needs repair, or see our Maintenance & Services page.

Frequently Asked Questions

How often should I clean my hot tub?

Rinse filters every 2–4 weeks, deep clean them every 3–4 months, and drain, scrub and refill every 3–4 months. Test water on your water-care system’s schedule. Your owner’s manual is the final guide.

What should I use to clean a hot tub shell?

Use a soft cloth and a non-abrasive cleaner made for spas. Avoid household cleaners, which can leave residue that causes foam. Rinse the shell well before refilling.

How do I clean hot tub filters?

Turn off the power, remove the filters and rinse them with a garden hose every 2–4 weeks. Every 3–4 months, soak them in a filter cleaner and rinse well.

Can I drain and clean my hot tub in winter?

Yes, with care. An empty spa is more vulnerable to freezing, so plan a winter water change for a milder day and ask Poolman about the safest way to refill.

Why is my hot tub water still cloudy after cleaning?

Unbalanced water, dirty or worn filters, or poor circulation can all cause cloudy water. Retest, check the filters, and contact Poolman if the problem continues.

Stock Up on Hot Tub Cleaning Supplies

Need filters, filter cleaner, water-care supplies or a service visit? Our team can help you build a simple cleaning routine for your spa. Visit Poolman of Wisconsin at 5890 Arndt Lane (Highway 93 South) in Eau Claire. Our hours are Monday–Friday 9am–6pm and Saturday 9am–4pm. Call 715.835.0929, email info@poolmanonline.com or request a free home consultation.

Want More Information?

Fill Out the Form Below & Our Team Will Reach Out with More Information


SHARE POST